Canon Paper Craft Special Vehicle 01 Series, Руководство по сборке

Страница: 3 / 7

Glue flaps a, b, c, d, and e
in order.
Leave an opening here.
Shape this part before gluing it.
This is a moving part.
Do not glue it.
Glue flaps a, b, and c in order.
Glue to part G.
Use care to attach this part
in the right direction,
referring to the illustration.
Fold the left and right flaps
back and glue each in place.
Use care with the angles at which you glue parts
12 and 13 in place, to ensure the two parts are parallel.
Cross section
Cross section
Moving part
Moving part
Moving part
Fold down the sides, then bend
the center down along the curved
edges and glue it in place.
Apply a small amount of
glue to the cut surface of
the paper as well, and glue
this part in place along
with the shape of the
bucket. (The bucket does
not have any glue tabs.)
Glue the back sides of the paper
parts together, in numbered order.
Fold in the ends of parts 22 and
28 and then glue them in place.
Glue parts 17 and 18 to
the reverse side of the bucket.
Reverse side
Assembly Instructions
Wheel Loader