Fold support E along the center line and glue together on the inside.
Attach the glue tabs on 12, one at a time, to the glue spots on part B.
* Fold the 12 to make the part B easier to stick on.
Stick support D onto the glue spot in the center of part G.
4
Attach one of the glue tabs on 9 to 11, then glue support D
to the underside of 9 by aligning the center of 9 with the center
of support D's glue spot.
Attach 9's other glue tab while folding the cake down.
Pop-up Card (Cake) : Assembly Instructions
Canon is a registered trademark of Canon Inc.
