Canon Paper Craft Clown and sea lion acrobatics Скачать руководство пользователя страница 7

Страница: 7 / 7

(Moving) Clown and sea lion acrobatics : Assembly Instructions

Canon Inc.

Hideharu Naitoh & unity design

After attaching the sea lion to part 15,

glue part 26 (27) into place inserted into it.

* Part numbers for the sea lion wearing the yellow vest are shown in parentheses.

Assemble both sea lions in the same way.

Finished!

Glue the sea lions' front and rear feet in place,

looking closely at the photograph of the

completed model to make sure you

position them at the correct angles.

Содержание Paper Craft Clown and sea lion acrobatics

Страница 3: ...r end of part 14 in place Note At this stage do not assemble parts 1 5 and 9 which you have already glued into place into a box shape yet Note Look closely at the illustration to make sure you do not reverse the front and rear sides Using an empty box or a similar item for a base makes it easier to work with this model when it is upside down ...

Страница 4: ...Naitoh unity design Use a round bar to give this piece a nice cylindrical shape Reinforce the gaps from the outside by using a scrap of paper or another utensil to apply glue to them Note Shape this piece so that the crank will not become warped Glue both sides of the box in place ...

Страница 5: ...nd sea lion acrobatics Assembly Instructions Canon Inc Hideharu Naitoh unity design Turn the handle at this point to check the movement Assemble both of the two part 25s and glue them in place Parts and Curl the clown ...

Страница 7: ...rt 15 glue part 26 27 into place inserted into it Part numbers for the sea lion wearing the yellow vest are shown in parentheses Assemble both sea lions in the same way Finished Glue the sea lions front and rear feet in place looking closely at the photograph of the completed model to make sure you position them at the correct angles ...