Océ VarioPrint 6000+ Customer Expectations Document
Version 1
Océ VarioPrint 6000+ Series Customer Expectations Document
Page 42
9.5 Operator Safety
Customer safety is of the highest priority and concern when using the KOM
program. While performing service, safety guidelines are very important to follow.
Safety guidelines cover three specific areas:
WARNING
Certain parts of the Océ VarioPrint 6000+ Series emit a strong magnetic field and
are a danger to customers with pacemakers. While the machine is being serviced
by a service technician, customers with pacemakers are not allowed in the
service technician’s work area.
9.5.1 Personal Safety
Each operator is ultimately responsible for his or her own personal safety. To
minimize personal risk of injury, the operator must follow the guidelines below at
all times while conducting operator maintenance:
•
Take notice of all posted Safety Labels outside and inside the machine.
•
Follow all instructions when replacing parts.
•
Always wear heat-resistant gloves when replacing the Spiral Cleaners.
•
Use correct lifting techniques. Use two (2) or more people to lift parts
weighing more than 50 lb (22.7 kg).
•
Remove loose clothing and jewelry.
•
Wear proper footwear when lifting equipment.
•
Do not eat, drink, or smoke near the equipment.
•
Clean hands after contact with toner. Do not touch your eyes if toner is on
your hands.
•
Do not wash or use hot water to remove toner from clothing. Doing so can set
the toner into the fabric. Quickly vacuum (using an approved vacuum for toner
pickup), or brush the affected clothing with light strokes.
•
Some surfaces are hot and require a wait time to allow the area to cool before
servicing.
9.5.2 Equipment Safety
When powering down the VarioPrint, service technicians or trained operators
should always power OFF the system from the power button located on the top
of the VarioPrint near the base of the operator panel.
When working inside the machine, take special care to:
•
Avoid contact with sharp edges.
•
Pay special attention when two or more persons are performing maintenance
on the VarioPrint.
•
Make sure all personnel are clear when starting the machine.
