Océ VarioPrint 135/120/110 Service Guide
Océ VarioPrint 135/120/110 Service Guide
January 2013
Revision 3
Page 33
D. Safety
The Developer Frame of the VarioPrint Series emits a strong magnetic field
and is a danger to service technicians/system engineers with pacemakers.
Service technicians/system engineers with pacemakers are not allowed to
remove the Developer Frame, Drum Unit, Developer Roller, Setup Unit or to
install or clean the Drum Unit.
Furthermore, when the Developer Frame is exposed, any individuals
(technicians, customers, walk up users, etc.) with pacemakers are not
allowed to be in the working area while the VarioPrint Series is being
serviced.
E. Power and Plug Requirements
Canon USA strongly suggests dedicated and properly grounded outlets be
provided for these VarioPrint devices and optional accessories. Before
installation, confirm that dedicated NEMA receptacles are available for these
devices.
The VarioPrint 135/120/110 Main Unit requires a dedicated single phase
208-
240 V/20A NEMA 6-20R receptacle
for proper operation. Confirm that a
single phase 208-240 V/20A NEMA 6-20R receptacle is available prior to
installation.
Power supply requirements for the VarioPrint 135/120/110 finishers and
accessories are listed in the table below. Confirm that the required power
receptacles are available prior to installation
Table 16 – Power and Plug Requirements Quick Reference
Part or Accessory
Power Supply
Power Receptacle
Main Unit
208-240 V/20 A outlet
NEMA 6-20R
Duplex Color Image Reader-D1
From the main unit
—
e-PIM-C1
NEMA 5-15R
Document Insertion Unit-F1
High Capacity Stacker-E1
18F
High Capacity Stacker-F1
Saddle Finisher-AF2
Finisher-AF1
Two-Knife Booklet Trimmer-A1
PRISMAsync Controller
Paper Folding Unit-F1
From the Finisher
N/A
Puncher Unit-BQ1
Booklet Trimmer-D1
19
A second High Capacity Stacker-E1 draws power from the first High Capacity Stacker-E1.
Содержание Oce VarioPrint 110
Страница 1: ...Océ VarioPrint 135 120 110 ...