Canon oce 31x5e Скачать руководство пользователя страница 37

Страница: 37 / 137

Basic copy jobs

Slide the set of copies to be stapled (face down with the top to the left) into the
staple slot and move the set to the left as indicated in figure 15.

[15] Stapling copies by hand

Wait until the staple has been inserted through the sheets.

Note:

If no staple is inserted, place the set against the left side of the slot again

and push it in a little further. Wait for the staple. If the set is still not stapled,
ask your key operator to solve the problem.

▼

Removing staples from stapled documents

Hook the staple behind the pin of the staple remover, as shown in figure 16.
The open ends of the staple will be on the upper side of the paper.

[16] Removing staples from stapled documents

Pull the set towards you while putting pressure on the staple with your finger
to prevent the paper from tearing.

The staple will open and be removed as it slides over the pin.

Содержание oce 31x5e










































































































































Результаты поиска

Содержание oce 31x5e

Отзывы:

Похожие инструкции для oce 31x5e

Бренды по названию

Популярные бренды

Canon oce 31x5e, Ежедневное обслуживание

Результаты поиска

Содержание oce 31x5e

Отзывы:

Похожие инструкции для oce 31x5e

Бренды по названию

Популярные бренды