Canon NP-2120, Руководство по обслуживанию

Страница: 93 / 207

AND TIMING
Jam Detection
The copier the movement of paper
using the following three
Pre-registration sensor (Q3)
Separation sensor (Q5)
sensor
Jams are identified terms of the
absence of paper at respective at
times as programmed the microprocessor
The copier has mechanisms that remember the
“remaining number of copies” and the modes”
response to a and data are retained for
about ten minutes after the front opened,
out the power.
The microprocessor holds the following five jam
detection sequences and, further, identifies a jam
if paper at time of
When the copier identifies a jam, immediately
stops operation and to the fixing
heater (HI); at the time, flashes the ‘JAM’
indicatoron the control panel, indicating the location
of the
No taken for jams which these
mechanisms.
Upper
+ + , ,
sensor
Separation sensor
sensor
3-48
Figure 3-46
CANON ING. CANON MAY IN JAPAN JAPOH)