manualshive.com logo in svg

Canon MX720 Series, Онлайн-руководство, Страница: 97 / 248

Поделиться
Скачать
Canon MX720 Series Скачать руководство пользователя страница 97

Checking the Ink Status with the Ink Lamps

1.

Make sure that the power is turned on, then, holding both sides of the paper output
tray, gently open it.

2.

Open the document cover, then open the ink cover.

Replacing Procedure

3.

Check the ink lamp.

Close the ink cover after checking the ink lamp status.

Replacing Procedure

 The ink lamp is on.

The ink tank is correctly installed.

 The ink lamp is flashing.

Flashing slowly (at around 3-second intervals)

 ...... Repeats

Ink tank is running low. Prepare a new ink tank.

Flashing fast (at around 1-second intervals)

 ...... Repeats

- The ink tank is installed in the wrong position.
Or
- The ink has run out.
Make sure that the ink tank is installed in the correct position as indicated by the label on the print
head holder. If the position is correct but the lamp flashes, there has been an error and the
machine cannot print. Check the error message displayed on the LCD.

A Message Is Displayed

 The ink lamp is off.

The ink tank is not installed properly or the function for detecting the remaining ink level is
disabled. If the ink tank is not firmly in place, make sure that the orange protective cap has been
removed from the bottom of the ink tank, then press on the top of the ink tank until the ink tank
clicks into place.
If the ink lamp is still off after reinstalling the ink tank, there has been an error and the machine
cannot print. Check the error message displayed on the LCD.

A Message Is Displayed

 Note

 You can also check the ink status on the computer screen.

Checking the Ink Status from Your Computer

Содержание MX720 Series

























































































































































































































































Отзывы:

Нет отзывов