Canon MX720 Series Скачать руководство пользователя страница 90 | Manualshive

Страница: 90 / 248

Canon MX720 Series Скачать руководство пользователя страница 90

Replacing an Ink Tank

When remaining ink cautions or errors occur, the message will appear on the LCD to inform you of the
error. Take appropriate action according to the message.

A Message Is Displayed

Note

For information on the compatible ink tank, refer to the printed manual:

Getting Started

.

If print results become faint or white streaks appear despite sufficient ink levels, see

.

Replacing Procedure

When you need to replace an ink tank, follow the procedure below.

Important

Handling ink

If you remove an ink tank, replace it immediately. Do not leave the machine with the ink tank

removed.

Use a new ink tank for replacement. Installing a used ink tank may cause the nozzles to clog.

Furthermore, with such an ink tank, the machine will not be able to inform you when to replace the
ink tank properly.

Once an ink tank has been installed, do not remove it from the machine and leave it out in the open.

This will cause the ink tank to dry out, and the machine may not operate properly when it is
reinstalled. To maintain optimal printing quality, use an ink tank within six months of first use.

Note

Color ink may be consumed even when printing a black-and-white document or when black-and-

white printing is specified.
Every ink is also consumed in the standard cleaning and deep cleaning of the print head, which may
be necessary to maintain the performance of the machine. When an ink tank is out of ink, replace it
immediately with a new one.

Useful Information about Ink

1.

Make sure that the power is turned on, then, holding both sides of the paper output
tray, gently open it.

2.

Open the document cover.

Important

When opening or closing the document cover, do not touch the buttons and LCD on the

operation panel. Doing so may result in an unexpected operation.

«
...
88
89
90
91
92
...
»

Содержание MX720 Series

























































































































































































































































Отзывы:

Нет отзывов