Canon MX720 Series Скачать руководство пользователя страница 222

Страница: 222 / 248

Network Setup of the Card Slot Screen

Note

This screen is not available depending on the printer you are using.

Displays settings of the card slot and allows you to map a card slot on the network as a network drive
on the computer.
Displays when you click

Setup

on the

Maintenance

screen.

Network Setup of the Card Slot

Screen (Setup Screen)

Network Setup of the Card Slot

Screen (Setup Failed Screen)

Note

You can change the network settings of the printer using IJ Network Tool with USB connection

after initializing the LAN settings. To change the network settings using IJ Network Tool, activate
the LAN settings in advance.

Network Setup of the Card Slot Screen (Setup Screen)

Drive:

Select the drive letter to assign to the network drive.

Update

Reloads the drive letters that are unassigned in

Computer

(

My Computer

in Windows XP) and

displays them in the

Drive:

list.

Network Setup of the Card Slot Screen (Setup Failed Screen)

Display when the network setup of the card slot is failed.

Содержание MX720 Series

























































































































































































































































Результаты поиска

Содержание MX720 Series

Отзывы:

Canon MX720 Series, Онлайн-руководство, Страница: 222 / 248

Результаты поиска

Содержание MX720 Series

Отзывы: