manualshive.com logo in svg

Canon MX720 Series, Онлайн-руководство, Страница: 120 / 248

Поделиться
Скачать
Canon MX720 Series Скачать руководство пользователя страница 120

Aligning the Print Head Position from Your Computer

Print head alignment corrects the installation positions of the print head and improves deviated colors and
lines.
This machine supports two head alignment methods: automatic head alignment and manual head
alignment. Normally, the machine is set for automatic head alignment.
If the printing results of automatic print head alignment are not satisfactory, see "

Aligning the Print Head

Position Manually from Your Computer

," and perform manual head alignment.

The procedure for performing automatic print head alignment is as follows:

 Print Head Alignment

1.

Open the printer driver setup window

2.

Click 

Print Head Alignment

 on the 

Maintenance

 tab

The 

Start Print Head Alignment

 dialog box opens.

3.

Load paper in the machine

Load one sheet of A4 size or Letter size Matte Photo Paper (MP-101) into the cassette (lower).

Note

 The type of media and number of sheets to be used differ when you select the manual head

alignment.

4.

Execute head alignment

Make sure that the machine is on and click 

Align Print Head

.

Follow the instruction in the message.

Important

 Do not open the ink cover while printing is in progress.

Note

 Wait until printing ends before performing other operations. Printing takes about 4 minutes to

complete.

 To print and check the current setting, open the 

Start Print Head Alignment

 dialog box, and

click 

Print Alignment Value

.

Содержание MX720 Series

























































































































































































































































Отзывы:

Нет отзывов