manualshive.com logo in svg

Canon MX720 Series, Онлайн-руководство, Страница: 121 / 248

Поделиться
Скачать
Canon MX720 Series Скачать руководство пользователя страница 121

Aligning the Print Head Position Manually from Your Computer

Print head alignment corrects the installation positions of the print head and improves deviated colors and
lines.

This machine supports two head alignment methods: automatic head alignment and manual head
alignment. Normally, the machine is set for automatic head alignment.
If the printing results of automatic print head alignment are not satisfactory, perform manual head
alignment.
The procedure for performing manual print head alignment is as follows:

 Print Head Alignment

1.

Open the printer driver setup window

2.

Click 

Custom Settings

 on the 

Maintenance

 tab

The 

Custom Settings

 dialog box opens.

3.

Switch head alignment to manual

Check the 

Align heads manually

 check box.

Note

 If the machine is off or if communication between the machine and the computer is disabled, an

error message may appear because the computer cannot collect the machine status.
If this happens, click 

OK

 to display the most recent settings specified on your computer.

4.

Apply the settings

Click 

OK

 and when the confirmation message appears, click 

OK

.

5.

Click 

Print Head Alignment

 on the 

Maintenance

 tab

The 

Start Print Head Alignment

 dialog box opens.

6.

Load paper in the machine

Load three sheets of A4 size or Letter size plain paper into the cassette (lower).

7.

Execute head alignment

Make sure that the machine is on and click 

Align Print Head

.

Follow the instruction in the message.

8.

Check the printed pattern

Enter the numbers of the patterns with the least amount of streaks in the associated boxes.
Even if the patterns with the least amount of streaks are clicked in the preview window, their numbers
are automatically entered in the associated boxes.

Содержание MX720 Series

























































































































































































































































Отзывы:

Нет отзывов