manualshive.com logo in svg

Canon MX520 series, Онлайн-руководство

Поделиться
Скачать
Canon MX520 series Скачать руководство пользователя страница 724

Advanced Settings of Receive Mode

You can specify the advanced settings of each receive mode.

This section describes the procedure to specify the advanced settings of the receive mode and the setting
items.

Specify the advanced settings following the procedure below.

1.

Make sure that the machine is turned on.

Confirming that the Power Is On

2.

Press the 

FAX

 button.

The Fax standby screen is displayed.

3.

Press the center 

Function

 button.

The 

Receive mode settings

 screen is displayed.

4.

Use the 

 button to select a receive mode, then press the right 

Function

 button.

5.

Use the 

 button to select a setting item, then press the 

OK

 button.

6.

Use the 

 button to specify the setting, then press the 

OK

 button.

Depending on the setting items, the related setting items are displayed after you specify the setting of
the advanced settings and press the 

OK

 button. Use the 

 button again to specify the setting, then

press the 

OK

 button.

For details on advanced settings of each receive mode, see below.

Advanced setting in 

TEL priority mode

Advanced setting in 

FAX only mode

Advanced setting in 

DRPD

Advanced setting in 

Network switch

Note

Refer to 

Receiving Faxes

 for information on receiving faxes or the procedure for each receive mode.

DRPD

 is available only in the US and Canada.

Network switch

 may not be available depending on the country or region of purchase.

Advanced setting in TEL priority mode

You can specify the following setting items.

•

Manual/auto switch

If you select 

ON

, the machine automatically receives faxes after the external device rang a specified

length of time.
You can specify the length of time until automatic reception is started.

•

User-friendly reception

If you select 

ON

, the machine automatically switches from telephone calling to fax reception by

detecting the fax signal (CNG signal) when you lift the handset of the telephone or the answering
machine answers. When you have an answering machine connected to the machine, select 

ON

 to

switch to fax reception automatically after the answering machine answers.
If you select 

OFF

, the machine does not switch from telephone calling to fax reception automatically

even if the machine detects the fax signal (CNG signal). Select 

OFF

 if you want the machine not to

switch automatically during a call.

Note

If you subscribe to Duplex Ringing service in Hong Kong, the number of times the external device

rings specified with 

Incoming ring

 in 

FAX only mode

 is available in 

TEL priority mode

.

Содержание MX520 series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды