manualshive.com logo in svg

Canon MX520 series, Онлайн-руководство

Поделиться
Скачать
Canon MX520 series Скачать руководство пользователя страница 558

A Message Is Displayed

This section describes some of the errors or messages.

Note

A Support Code (error number) is displayed on the computer or on the LCD for some error or

message. For details on errors with Support Codes, refer to 

Support Code List

.

If a message is displayed on the LCD, see below.

•

A Message Is Displayed on the LCD

If a message is displayed on the computer, see below.

•

Error Regarding Automatic Duplex Printing Is Displayed

•

Error Regarding the Power Cord Being Unplugged Is Displayed

•

Writing Error/Output Error/Communication Error

•

Other Error Messages

•

The 

Inkjet Printer/Scanner/Fax Extended Survey Program

 Screen Is Displayed

A Message Is Displayed on the LCD

Confirm the message and take an appropriate action.

•

Data of supported types are not saved.

• There is no image data or document saved on the USB flash drive that can be read by this

machine.

• The machine may not recognize the file if the file name or folder path contain certain characters.

Use only alphanumeric characters.

• Photo data edited or processed on a computer must be printed from the computer.

Note

When a photo which has been processed on a computer is selected, "?" is displayed on the LCD.

•

Cannot print the specified PDF file. An error has occurred while scanning

the file, or the format is not supported, or the file is too large.

• Make sure the PDF file is printable from a USB flash drive. See Printing Documents (PDF File)

Saved on a USB Flash Drive for more information.

Note

The names of the PDF files are displayed even though they cannot be printed from the USB

flash drive. It is recommended you confirm whether they are printable. If one of the following
conditions applies to the PDF files, they are not printable.

The 

Details

 screen is not displayed for the PDF file you want to print.

Characters other than machine name, 

IJ Scan Utility

, or 

My Image Garden

 are

displayed on 

Created with

 on the 

Details

 screen.

"?" is displayed on the preview screen.

• Data edited or processed on a computer must be printed from the computer.

•

The specified PDF file contains unprintable data. Some portions may not

be printed.

PDF file which contain lot of graphics or hi-resolution images may lose that data or stop before printing
is completed. In this case, print from the computer.

•

Failed to scan head alignment sheet.

Scanning the print head alignment sheet has failed.

Press the 

OK

 button to dismiss the error, then take the actions described below.

• Make sure that the print head alignment sheet is set in the correct position and orientation on the

platen glass.

• Make sure the platen glass and the print head alignment sheet are not dirty.
• Make sure the type and size of loaded paper is suitable for Automatic Print Head Alignment.

Содержание MX520 series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды