103
Using a Memory Car
d
MV630i
MV650i
E
Recording Still Images on a Memory Card
You can record still images with the
camcorder, from a tape in the camcorder
(
104), or from devices connected via the
DV terminal or AV terminal (
105).
❍
Do not turn off the camcorder, disconnect the power source or remove the
memory card while the card access display (<<< or >>>) in the upper right
corner of the screen or the card access indicator is flashing. Doing so could
result in data damage.
❍
When you are using a SD Memory Card, make sure that the protect switch is
set to allow recording.
Make sure to insert a memory card with enough remaining capacity.
Recording with the Camcorder
1. Set the camcorder to CARD CAMERA mode.
The remaining image capacity and other information appear.
2. Press the PHOTO button halfway.
•
F
flashes in white and turns green when focus is adjusted.
• Exposure is locked.
• When you press the PHOTO button on the wireless controller,
recording starts immediately.
3. Press the PHOTO button fully.
• You hear a shutter sound, and the screen appears as if a
shutter has been released.
• The card access indicator flashes.
• The still image shown on the screen will be recorded on the memory card.
To use the self-timer (
69), press the
(self-timer) button before step 2 and
press the PHOTO button fully.
CARD PLAY (VCR)
CARD CAMERA
PLAY (VCR)
CAMERA
PHOTO
Card access
indicator
PHOTO button
PHOTO
5_D73PAL_E(99-132) 02.12.26 9:30 PM Page 103