Canon MultiPASS F50 Скачать руководство пользователя страница 70

Страница: 70 / 102

Handle ink tanks carefully so that ink does not spill. Never

squeeze the sides of an ink tank.

Install new ink tank

Gently insert the ink tank and press down until it clicks into place.

Do not

force an ink tank into the printhead. If the ink tank does not go in smoothly,
reseat it, then try again.

Press the scanning unit closed until it clicks securely into place.

Maintaining the Printhead

Routine printhead maintenance can extend the life of your F50 MFP printhead.

Printing a Nozzle Check Pattern

The printhead discharges ink through nozzles—tiny openings from which the ink
is sprayed. If faded or streaked colors and text appear on your output, some of
the nozzles may be clogged. You can check this by printing a nozzle check pattern.

Ensure that paper is loaded in the F50 MFP before performing a nozzle check.

To print a nozzle check pattern from the F50 MFP control panel:

Select PRINTER SETTINGS

Press

until P

RIIN

R S

TIIN

S appears. Press

to select.

Print nozzle check pattern

The C

NIIN

G option displays. Press

to select.

The N

E C

K option displays. Press

to select.

MultiPASS F50 User’s Manual

F50 Chapter 8-33.qxd 6/20/01 5:18 PM Page 64

Содержание MultiPASS F50







































































































Результаты поиска

Содержание MultiPASS F50

Отзывы:

Canon MultiPASS F50, Руководство пользователя, Страница: 70 / 102

Результаты поиска

Содержание MultiPASS F50

Отзывы: