manualshive.com logo in svg

Canon MultiPASS C755, Руководство по обслуживанию, Страница: 26 / 143

Поделиться
Скачать
Canon MultiPASS C755 Скачать руководство пользователя страница 26

1-19

MultiPASS C755  Chapter 1: General Description

3.3.2 Print media

■

Plain Paper

The MultiPASS supports letter-, legal-, and A4-size paper in portrait orientation. You can
use regular copier paper, cotton bond paper, and typical letterhead. Your unit does not
require special ink jet paper, and produces letter quality print on most plain paper. Always
use paper without curls, folds, staples, or damaged edges. Copier paper has a preferred
side for printing. Look at the label on the package to see which side to print on.

■

Envelopes

The MultiPASS can print on U.S. Commercial No. 10 envelopes and European DL
envelopes.

The following envelopes are not recommended because they may cause jams or
smears, resulting in damage to your unit:
• Envelopes with windows, holes, perforations, cutouts, and double flaps.
• Envelopes made with special coated paper or deeply embossed paper.
• Envelopes with peel-off sealing strips.
• Envelopes with letters enclosed.

You may be able to stack envelopes of other sizes in the multi-purpose tray. However,
Canon cannot guarantee consistent performance on envelope sizes other than U.S.
Commercial No. 10 and European DL.

■

Glossy Photo Paper GP-301

Canon Glossy Photo Paper GP-301 is a high gloss, thick paper that produces the look
and feel of a photograph. Use this paper with the Photo BJ cartridge to print photo-
realistic images.

■

Banner Paper

Canon Banner Paper is specifically designed for printing one continuous sheet in a
banner format. The connected sheets are divided by perforations and you can print
from two to six sheets at a time. Canon Banner Paper is specially designed for use with
Bubble Jet printers and produces bright and vivid color images.

■

High Resolution Paper HR-101S/HR-101N*

Canon High Resolution Paper HR-101S/HR-101N is designed to produce near-
photographic quality print output with sharp and vivid graphics. For best results, use this
paper with the Photo BJ cartridge.

* The Canon High Resolution Paper HR-101N will be released in the near future.

Figure 1-12 Print Media (1)

Содержание MultiPASS C755
















































































































































Отзывы:

Нет отзывов