3. After the MultiPASS Desktop Manager software has installed, Canon Photo and TextBridge Pro will
install automatically. When installation is complete, the Setup program determines whether your
computer needs to be restarted.
NOTE:
The next time you start your computer, you may see the "New Hardware Found" screen. Wait a
few seconds while the system updates itself; the screen will disappear.
The next time you start your system, double-click on the Canon Creative Launcher icon on your desktop.
From here you can install the Canon Creative software, run the software programs after they are installed,
register the MultiPASS, view the online manuals, and find out how to order supplies and get help from
Canon.
Windows 98/2000/Millennium Edition USB Cable Users
Windows 98/Millennium Edition
1. Make sure the MultiPASS C555 is NOT connected to your computer.
2. Turn on your computer. Close all applications before you start installation.
3. Insert the Canon Creative CD into your CD drive. Setup starts automatically. NOTE: If Setup does
not start automatically, click Start on the Windows taskbar and then click Run. Type X:\SETUP
(where X:is your CD-ROM drive). Then click OK.
4. When prompted, connect the USB cable to your computer and then to the MultiPASS (see Step 2
for details).
5. Follow the instructions on each screen to complete software installation.
Windows 2000
1. Make sure the MultiPASS C555 is NOT connected to your computer.
2. Turn on your computer.
3. Connect the USB cable to your computer and then to the MultiPASS (see Step 2 for details).
Windows recognizes the new device and starts Plug & Play for your USB port.
4. Follow the instructions on each screen. When you see this screen:
Insert the Canon Creative CD into your CD drive and wait for the drive to start up. Make sure CD-
ROM drive is checked, and be sure to uncheck the other options. Then click Next.
5. Continue to follow the instructions on each screen to complete software installation.