Canon Multi-PDL Printer Kit-E1 Скачать руководство пользователя страница 11

Страница: 11 / 71

Chapter 1

1-4

1.2.2

PCL Printer Driver

0008-5666

FONT HANDLING:

・

PCL5e/5c

HP-GL/2 Mode

Texts are handled in the PCL mode, or in the HP-GL/2 mode if:

1. Characters are clipped.

2.Characters are rotated.

Supported typefaces include:

1. Standard

2. Italic

3. Bold

4. Bold Italic

Raster Mode

Use of a device font is determined by the driver setting.

If a device font is used, the Raster Mode will handle data the same as the HP-GL/2

Mode.

If not, the following restrictions will be imposed.

*GDI Raster Fonts unavailable 1 byte fonts such as Courier, MS Sans Serif, MS

Serif, etc.

*GDI Vector Fonts available 1 byte fonts such as Modern, Roman, Script, etc.

*TrueType Fonts available 1 byte fonts such as Arial, Courier New, Symbol, Times

New Roman, etc.

・

PCL6

PCL6 controls the texts if:

1.Characters are enlarged or reduced.

2.Characters are rotated.

3.Characters are clipped.

NOTE:
GDI Vector Fonts and TrueType Fonts become available only after added to Windows.

Содержание Multi-PDL Printer Kit-E1








































































Результаты поиска

Содержание Multi-PDL Printer Kit-E1

Отзывы:

Похожие инструкции для Multi-PDL Printer Kit-E1

Бренды по названию

Популярные бренды

Canon Multi-PDL Printer Kit-E1, Руководство по обслуживанию

Результаты поиска

Содержание Multi-PDL Printer Kit-E1

Отзывы:

Похожие инструкции для Multi-PDL Printer Kit-E1

Бренды по названию

Популярные бренды