Canon Multi Function Professional Puncher-A1, Руководство по обслуживанию

Страница: 13 / 44

13
TURN
CLOCKWISE
•
Using a flat-head screwdriver, turn the adjustment screw clockwise or counter-
clockwise to move the die set position cradle.
NOTE: Seven full turns of the adjustment screw result in a ¼” change in the
punched hole position.
•
Before tightening the lock-down screw, tilt or bias the assembly towards the
bottom of the machine and tighten the lock-down screw. This will ensure positive
engagement between the locking lever and the die set.
TILT TO BOTTOM
OF M/C
SCREW
TIGHTEN
•
Run a test sample of punched paper and recheck paper alignment. Re-adjust if
necessary.
4.3 REMOVAL OF PUNCH MODULE
1. Examine the Drive Belts. Note the consistency in tightness of the belts. They
should all have approximately ¼” of deflection; remove the four drive belts items
1, 2, 3, 4.
Disconnect the Sensor Wire Connection
Get other manuals https://www.bkmanuals.com