4
F
Detect Access Point
Macintosh
To connect to the access point with
WEP
or
WPA
displayed in the
Encryption
column, enter the network key (WEP key or WPA key) in
Network Password
,
then click
Connect
. For details on network keys, refer to "3.1 About Network Key (Windows)/Network Password (Macintosh)" in the printed manual:
Network
Setup Troubleshooting
.
•
If you want to select an access point manually, or if the target access point is not displayed in the list, or if an error message appears, refer to “5 The
following screen is displayed during setup” in the printed manual:
Network Setup Troubleshooting
.
•
When the
Access Points
screen appears, select an access point to use, then click
Connect
.
When an access point is detected automatically, the
Access Points
screen does not appear. Go to step .
