Canon MP 1000, Руководство пользователя

Страница: 165 / 278

Chapter 9 Using Special Dialing
9-9
Communicating Using the Distinctive Ringing Pattern
Detector (DRPD) Feature
Using the MultiPASS 1000 with a DRP service is almost the same
as using it with a normal telephone line. When you receive calls,
however, the MultiPASS 1000 responds somewhat differently, as
described below.
N
It’s a good idea to use DRP service with automatic receiving only.
MultiPASS 1000 set for automatic receiving
(
ANS HOOK UP
and
MANUAL
lights off)
❏
When someone calls using the number assigned for telephone
communication, the MultiPASS 1000 rings in the pattern you
registered in the above procedure. When you hear the
telephone call ring pattern, simply pick up the handset (or
extension phone) and talk. If you do not pick up the handset,
the MultiPASS 1000 continues to ring until the other party
hangs up.
❏
When someone sends a fax using the number assigned for fax
communication, the MultiPASS 1000 does not ring. It receives
the document automatically.
MultiPASS 1000 set for manual receiving
(
MANUAL
light on)
When you receive a call over any of the numbers in the DRP
system, the MultiPASS 1000 rings in the appropriate pattern you
registered earlier. Pick up the handset.
❏
If the call is from a person, talk normally.
❏
If you hear a slow beep, press
START/COPY
to receive a fax.
MultiPASS 1000 set for an answering machine
(
ANS HOOK UP
light on)
❏
When someone calls using the number assigned for telephone
communication, the MultiPASS 1000 rings in the pattern you
registered earlier. While the MultiPASS 1000 rings, the
answering machine connects and then takes over the call.
❏
When someone sends a fax using the number assigned for fax
communication, the MultiPASS 1000 receives the document
automatically.
Using Special
Dialing