Canon ME20F-SHN, Руководство по эксплуатации сети

Страница: 87 / 185

Sett
ing Page
4
87
Setting suitable for playback on TV monitors. Produces even better black gradation in the shadows (dark areas of the
image) than with the [Normal 3] setting.
[Master Pedestal]
Increases or decreases the black level. Moving the slider to the left makes black areas darker, and moving it to the right
makes black areas brighter.
This setting can be adjusted from -50 to +50. (Default: ±0)
[Master Black Red]
Corrects the R value for the black color cast.
This setting can be adjusted from -50 to +50. (Default: ±0)
[Master Black Blue]
Corrects the B value for the black color cast.
This setting can be adjusted from -50 to +50. (Default: ±0)
[Black Gamma]
Raises or lowers the lower part of the gamma curve (dark areas of the image). Changing the value adjusts the gamma curve
on the black side within the range of the figure.
This setting can be adjusted from -50 to +50. (Default: ±0)
Note
When [Gamma] is set to [Wide DR] or [Canon Log], [Black Gamma] is not available.
[Knee]
By compressing the highlights, you can prevent parts of the image from being overexposed.
Note
The [Knee] setting is available only when [Gamma] is set to [Normal 1] - [Normal 4].
[Knee Slope]
Determines the slope of the gamma curve above the knee point.
This setting can be adjusted from -35 to +50. (Default: ±0)
[Knee Point]
Sets the knee point of the gamma curve.
This setting can be adjusted from 50 to 109. (Default: 95)
Input
Out
put
Outp
ut
Input
Normal 1
Wide DR
Canon Log
Normal 2/3/4
Normal 3
Normal 4
Normal 1
Normal 1/2
Input
Ou
tp
u
t
Level