Canon ME20F-SHN, Руководство по эксплуатации кнопок

Страница: 36 / 44

Menu Options
36
[Shockless WB] [On], [Off]
When this setting is set to [On], makes the transition look smoother when the white
balance is changed.
[Iris Increment] [1/2 stop] , [1/3 stop], [Fine]
Determines the aperture value increment used when adjusting the aperture. When this
setting is set to [Fine], the increments will be smaller than 1/3 stop.
[Zoom-Iris Correct.] [On] , [Off]
If you are using a compatible lens*, when this setting is set to [On], the camera will
adjust the aperture as needed to keep the selected aperture value while zooming.
Because of this adjustment, the brightness of the image might change slightly or you
may hear the operation sound. When this setting is set to [Off ], the aperture will
close gradually (the image will turn darker) as you zoom but you will not hear the
aperture's operation sound.
* Some EF lenses and EF Cinema lenses are not compatible with this function.
[Focus Limit] [Activate] [On], [Off]
Turns the focus limit on/off (
A
22).
[Far] [Set], [Reset], [Cancel]
Allows you to set the far end of the focus limit for the attached lens (
A
22). When a
focus limit has not been set, [Limit Off ] will appear on the submenu screen.
[Set] : Saves the current focus position for the far end of the focus limit.
[Reset] : Clears the currently set focus position.
[Cancel] : Cancels the operation.
[Near] [Set], [Reset], [Cancel]
Allows you to set the near end of the focus limit for the attached lens (
A
22). When
a focus limit has not been set, [Limit Off ] will appear on the submenu screen.
[Set] : Saves the current focus position for the near end of the focus limit.
[Reset] : Clears the currently set focus position.
[Cancel] : Cancels the operation.
[Focus Control] [Camera] , [Lens]
Determines the signal path used to adjust the focus.
[Camera] : Default setting for most cases.
[Lens] : You can adjust the focus using an accessory connected to the lens but you
will not be able to use the camera's autofocus functions or an optional RC-V100
Remote Controller connected to the camera to adjust the focus.
[Tele-converter] [4x], [3x], [2x], [Off]
Allows you to digitally increase the focal length of the camera by approximately the
selected factor. Note that the image is digitally processed so the image will
deteriorate throughout the zoom range.
Menu item Submenu / Setting options