Canon MAXIFY GX2000 Series Скачать руководство пользователя страница 644

Страница: 644 / 693

Message Is Displayed

This section describes some of the messages.

If a message is displayed on the printer's touch screen, see below.

Message Is Displayed on Printer's Touch Screen

If a message is displayed on the computer, see below.

Error Regarding Automatic 2-sided Printing Is Displayed
Error Regarding Power Cord Being Unplugged Is Displayed (Windows)
Writing Error/Output Error/Communication Error (Windows)
Other Error Messages (Windows)

Message Is Displayed on Printer's Touch Screen

Check the message and take appropriate action.

•

Power was not turned off correctly the last time. Press the

button when turning power off.

•

The printer may have been unplugged while the power was still on.

Select

on the printer's touch screen to cancel the error.

Refer to

Turning the Printer On and Off

for the correct way to turn the power off.

•

Cannot connect to the server. Please wait a while and try again.

•

The printer cannot connect to the server due to a communication error.

Select

on the printer's touch screen to cancel the error and try again after a while.

•

Check the page size and tap [OK].

•

The size of the loaded paper is different from the paper size set in

Fax paper settings

Select

on the printer's touch screen to cancel the error.

Select

Function list

Fax

, check

Page size

Type

and

Paper src

Fax paper settings

, and then

reload the paper accordingly.

•

Replace the receiver.

•

The handset is not placed in the handset cradle correctly.

Replace the handset correctly.

Note

• See Message for Faxing Is Displayed on Fax Standby Screen for the message displayed on the fax

standby screen.

Error Regarding Automatic 2-sided Printing Is Displayed

Check

See Automatic 2-sided Printing Problems and take the appropriate action.

644

Содержание MAXIFY GX2000 Series






















































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание MAXIFY GX2000 Series

Отзывы:

Canon MAXIFY GX2000 Series, Онлайн-руководство, Страница: 644 / 693

Результаты поиска

Содержание MAXIFY GX2000 Series

Отзывы: