Canon MAXIFY GX2000 Series Скачать руководство пользователя страница 583 | Manualshive

Страница: 583 / 693

Canon MAXIFY GX2000 Series Скачать руководство пользователя страница 583

Cannot Print (Scan) from Smartphone/Tablet

If you cannot Print (Scan) from your smartphone/tablet, it is possible that your smartphone/tablet cannot
communicate with the printer.

Check the cause of your problem according to the connection method.

Cannot Communicate with Printer via Wi-Fi
Cannot Connect to Printer through Wireless Direct

Note

• For problems on printing with other connection methods or more on performing settings of each

•

connection method:

Using PIXMA/MAXIFY Cloud Link
Printing from iOS Device (AirPrint)

Cannot Communicate with Printer via Wi-Fi

If your smartphone/tablet cannot communicate with the printer, check the following.

Check 1

Check power status of printer, network devices (e.g. wireless router), and

your smartphone/tablet.

• Turn on the printer or devices.
• If the power is already turned on, cycle the power switch.
• It may be necessary to resolve wireless router problems (e.g. update interval of a key, problems of DHCP

update interval, energy saving mode) or to update the wireless router firmware.

For details, contact the manufacturer of your wireless router.

Check 2

Check settings of your smartphone/tablet.

Make sure Wi-Fi is enabled on your device.

For details, refer to your device's instruction manual.

Check 3

Is printer connected to wireless router?

• Use the icon on the lower left of the touch screen to check the connection status between the printer and

•

wireless router.

If the

icon is not displayed, Wi-Fi is disabled. Turn on wireless communication on the printer.

• Make sure the network settings of the printer (e.g. network name (SSID) or network key (password), etc.)

•

are identical with those of the wireless router.

To check the settings of the wireless router, refer to the instruction manual provided with it or contact its
manufacturer.

583

«
...
581
582
583
584
585
...
»

Содержание MAXIFY GX2000 Series






















































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов