Canon MAXIFY GX2000 Series, Онлайн-руководство, Страница: 178 / 693

Note
• When Reduce is selected, V.34 (Super G3) can not be used. Communication time generally •
becomes longer than when communicating with V.34 (super G3).
• This setting has priority even if you select 33600 bps for TX start speed or RX start speed . •
• Auto redial •
Enables/disables automatic redialing.
If you select ON , you can specify the maximum number of redial attempts and the length of time the
printer waits between redial attempts.
• Dial tone detect •
Avoids mistransmission when reception and transmission occur at the same time.
If you select ON , the printer transmits the fax after confirming the dial tone.
Note
• This setting may not be available depending on the country or region. •
• Pause time settings •
Sets the length of pause time for each when you enter "P" (pause).
• TTI position •
Selects the printing position of the sender information (outside or inside the image area).
• Remote RX •
Enables/disables remote reception.
If you select ON , you can specify the remote reception ID.
Remote Reception
• Color transmission •
When faxing color documents using the ADF, selects whether to convert them into black & white data
if the recipient's fax device does not support color faxing.
If you select Disconnect , the printer does not send color documents when the recipient's fax device
does not support color faxing.
• RX image reduction •
Enables/disables automatic reduction of incoming faxes so that they fit in the selected paper.
If you select ON , you can select the image reduction direction.
• Adv. communication settings •
◦ ECM TX ◦
Selects whether to send faxes in Error Correction Mode (ECM).
Transmission/Reception of Faxes Using ECM
◦ ECM RX ◦
178