Projector WUX10 MarkII User Commands
- 60 -
Revision History / Date
Changes
Revised by
Approved by
Description
(1) This emulates pressing of the remote control buttons for controlling the projector.
(2) With the emulation of the remote control operations, the functions of the buttons
corresponding to the parameters cannot necessarily be executed.
Emulation simply consists in emulating the pressing of the buttons.
(3) Function for transfer to special mode (service mode) is unavailable.
(4) A parameter with '+REP' signifies "button press start". (This is the same as the status in
which the remote control button is held down.)
Be absolutely sure to send the '*-REP' parameter, and end the button pressing last of all.
The button pressing is ended in the cases below as well.
<1> When a panel or remote control button has been operated
<2> When a command has been received
Example
Setting
> RC POWER
< i:OK
* Commands are indicated by ">", and responses are indicated by "<".