![background image](http://html1.mh-extra.com/html/canon/lx-mw500/lx-mw500_user-manual_4180579032.webp)
32
Connecting multiple sources through HDBaseT
HDBaseT is a connectivity standard that combines HD digital video, audio, Ethernet, and various control
signals. These signals are transmitted with one CAT5e (or above) cable up to 100 meters in length. With
the use of HDBaseT switching matrix (commercially available), you may connect multiple sources to
your projector with HDBaseT connection.
•
When connecting the RJ45 cable, avoid coiling and intertwining the cable as it may cause
signal noise or interruption.
•
The illustration below is for reference only, actual layout may vary.
•
Use a shielded LAN cable rated at CAT5e or better.
•
Maximum transmission distance is 100 m.
•
However, maximum transmission distance may be shorter in some environments.
•
Do not use the LAN cable when it is coiled or bundled.
•
Inserting or removing the LAN cable during projection may cause noise.
•
Connectivity with all HDBaseT transmitters on the market is not guaranteed.
•
Some HDBaseT transmitters may not enable correct projection when used to connect source
equipment to the projector.
•
Commands cannot be received through HDBaseT when the projector is in standby mode.
VGA IN
YPbPr
RJ45
Lan
HDMI
RS232
RJ45
HD Connect
IR TX
IR RX
Notebook computer
Blu-ray player
Control computer
HDBaseT matrix
Projector
LAN cable