background image

28

Connecting an S-Video source device

Examine your Video source device to determine if it has an unused S-Video output terminal available: 

If so, you can continue with this procedure.

If not, you will need to reassess which method you can use to connect to the device.

To connect the projector to an S-Video source device:

1.

Take an S-Video cable and connect one end to the S-Video output terminal of the Video source 
device.

2.

Connect the other end of the S-Video cable to the 

S-VIDEO

 terminal on the projector.

3.

If you wish to make use of the projector speaker in your presentations, take a suitable audio cable and 
connect one end of the cable to the audio output terminal of the computer, and the other end to the 

AUDIO IN

 terminal of the projector.

4.

If you wish, you can use another suitable audio cable and connect one end of the cable to the 

AUDIO 

OUT

 terminal of the projector, and the other end to your external speakers (not supplied).

Once connected, the audio can be controlled by the projector On-Screen Display (OSD) menus. See 

"Adjusting the sound" on page 44

 for details.

The final connection path should be like that shown in the following diagram:

If the selected video image is not displayed after the projector is turned on and the correct 
video source has been selected, check that the Video source device is turned on and operating 
correctly. Also check that the signal cables have been connected correctly.

If you have already made a Component Video connection between the projector and this S-
Video source device, you need not connect to this device using an S-Video connection as this 
makes an unnecessary second connection of poorer picture quality. See

 

"Connecting Video 

source devices" on page 25

 for details.

AV device

S-Video cable (option)

Speakers

Audio cable (option)

Audio 

cable 

(option)

Содержание LV-WX320

















































































Отзывы: