Canon Legria HFM52, Инструкция по эксплуатации

Страница: 213 / 241

Additional Information
Š 213
Memory card writing error Attempt to recover the data?
- This message will appear the next time you turn on the camcorder if power supply was acci-
dentally interrupted while the camcorder was writing to the memory. Select [Recover] to try to
recover the recordings. If you inserted a memory card that contains scenes recorded using
another device, we recommend that you select [No].
Need to recover files from the memory card. Change the position of the LOCK switch on the
memory card.
- This message will appear the next time you turn on the camcorder if power supply was acci-
dentally interrupted while the camcorder was writing on the memory card and later the posi-
tion of the card's LOCK switch was changed to prevent erasure. Change the position of the
LOCK switch.
No memory card
- Insert a compatible memory card into the camcorder (
A
38).
- The memory card may not be inserted correctly. Insert the memory card all the way into the
memory card slot until it clicks.
Not enough available space
- Delete some recordings on the memory card (
A
59, 132) or select the [3 Mbps] bit rate for
the conversion to SD.
Number of scenes already at maximum
- The maximum number of AVCHD scenes (3,999 scenes) has been reached. Delete some
scenes (
A
59) to free some space.
Number of stories already at maximum
- The gallery already contains the maximum number of stories (98 stories in any one given
memory). Delete some stories (
A
62) or change the recording memory for movies (
A
39).
Recording program: Underwater / Surface
Turn on the camcorder while holding the zoom lever toward T or W to change the recording
program
š
b
Ÿ
.
- Follow the instructions to switch the recording program between [Underwater] and [Surface]
while the camcorder is secured inside the optional WP-V4 Waterproof Case.
Recording was stopped due to insufficient write speed of the memory card
- The data transfer rate was too high for the memory card in use and the recording was
stopped. Replace the memory card with one rated SD Speed Class 2, 4, 6 or 10.
- After repeatedly recording, deleting and editing scenes (fragmented memory), it will take
longer to write data on the memory and recording may stop. Save your recordings (
A
144)
and initialize the memory (
A
40).
Scene recorded using another device. Cannot copy the scene.
- Scenes that were not recorded with this camcorder cannot be copied to the memory card.
- Scenes that were edited using the supplied PIXELA's software or other software cannot be
copied or divided.
COP
Y