Canon LEGRIA HFM307, Инструкция по эксплуатации

Страница: 170 / 193

170 
Additional Information
This photo cannot be displayed
- You may not be able to display photos taken with other devices or image files created or
edited on a computer and then transferred to a memory card connected to the computer.
This
B
photo could not be deleted
- Protected photos (
B
) cannot be deleted. Remove the protection (
0
110).
This scene was recorded using another device and cannot be added to the playlist.
- Scenes recorded using another device and then transferred to a memory card connected to a
computer cannot be added to the playlist.
To record video on this memory card, it is recommended to use only the XP+/SP/LP recording
modes
- Movies may not be recorded correctly on this memory card if the recording mode is set to
MXP or FXP mode (
0
56).
To use this function change the camcorder's mode from
5
to
y
- You pressed a button that cannot be used in mode. Set the mode switch to
y
to set
the camcorder to flexible recording mode.
Too many photos. Disconnect the USB cable.
- Disconnect the USB cable. Try using a memory card reader or decrease the number of photos
on the memory card to fewer than 2,500 photos (printers, Windows computers), or 1,000
photos (Macintosh computers).
- If a dialog box appeared on the computer screen, close it. Disconnect the USB cable, and
restore the connection after a short while.
b
Total play time is too long
- The playlist cannot be converted when its total playback time exceeds 2 hours and 30 min-
utes. Reduce the number of scenes in the playlist.
Unable to recognize the data
- You transferred to a memory card connected to the computer video files that were recorded
with another device using a different television system (NTSC). Play back the recordings with
the device originally used to record them.
Unable to recover data
- Could not recover a corrupted file. Save your recordings (
0
123) and initialize the memory
using the [Complete Initialization] option (
0
37).
Direct Print Related Messages
Data transfer error
- Cancel printing, disconnect the USB cable and turn off the printer. After a while, turn the
printer back on and reconnect the USB cable.
- You attempted to print from a memory card that contains a large number of photos. Reduce
the number of photos.