Canon Legria hfm300, Инструкция по эксплуатации

Страница: 124 / 203

124 Š
External Connections
IMPORTANT
• Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss.
- Do not open the memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder’s operating mode.
• When copying photos onto an Eye-Fi card, photos will be uploaded
automatically if you are within the range of a configured network. Always
verify that Eye-Fi cards have been approved in the country/region of
use. See also
Using an Eye-Fi card (
0
142).
NOTES
• If the memory card slot cover is open, or the LOCK switch on the mem-
ory card is set to prevent writing, you will not be able to copy recordings
to the memory card.
•
a
Scenes that were edited using the supplied software Image-
Mixer 3 SE and were then written back to the camcorder cannot be
copied to the memory card.
• If there is not enough space on the memory card, as many photos as
possible will be copied before stopping the operation.
Saving Recordings on a Computer
Movies recorded with this camcorder are saved in the built-in memory
(
a
only) or on the memory card. Because space is limited, make
sure to save your recordings on a computer on a regular basis.
Carefully read the information in
SDXC Memory Cards (
0
34) before
performing the procedure using recordings made on an SDXC memory
card.
Saving Movies
With the supplied software ImageMixer 3 SE you can save scenes to
your computer. If necessary, video files previously saved on a
computer can be restored back to the camcorder (
a
only) or a
memory card. The software also offers many options for organizing
your video library, editing video and more.