Canon LBP3310 Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 114

background image

Chapter 2

2-11

roller of this printer interlocks the photosensitive drum in order to improve the image quality.
Step 5: Separation

F-2-15

A print paper is separated from the drum by its elasticity. (Curvature Separation) The static charge on the back side of a print paper is decreased with the electrostatic
eliminator after the transfer process in order to stable the feeding operation and prevent the crescent spots of printing image under the L/L environment.

2.4.1.6 Fixing block

0018-3109

LBP3370 / LBP3310

The toner image transferred onto a print paper through the transfer block can be smeared easily by hands since it is only attracted to the paper by the static electricity.
The paper and the toner on it are fixed by pressure and fused by heat to be a permanent image in this block.
Step 6: Fixing

F-2-16

There is a possibility to splatter the toner when it is fixed because the toner image transferred onto a paper is attached by the positive charge from the back side of it.
This printer applies the negative DC voltage to the fixing film through the pressure roller, so that the negative charge is flown to the front side of a print paper from
the fixing film before it comes to the fixing heater. It results that the transferred toner is held stronger onto the paper and it is prevented from splattering.
This printer utilizes the on-demand fixing method with the lower heat capacity fixing film, which warms up quickly and does not require the power supply during
standby period. The feature of this method is that the wait period is shorter than 10 sec. and thus energy-saving.
The fixing film is a sleeve shaped film made from the polyamide and the fluorine coats its surface to prevent the offset.

2.4.1.7 Photosensitive drum cleaning block

0018-3110

LBP3370 / LBP3310

In the transfer block, not all toner is transferred from the photosensitive drum onto a print paper but some remains on the drum.
The drum cleaning block cleans the surface of the photosensitive drum in order to keep a clear image in the following prints.
Step 7: Drum cleaning

F-2-17

The cleaning blade scrapes off the leftover toner on the drum surface to be got ready for the next print. The waste toner is kept in the cleaner container.

Paper

Transfer charging roller

Photo-

sensitive

drum

Static charge

eliminator

Fixing film

Fixing heater

Paper

Toner

Pressure roller

Fixing film

Toner

Paper

Pressure roller

Cleaner container

Sweeper strip

Cleaning blade

Photosensitive

drum

«
...
37
38
39
40
41
...
»

Содержание LBP3310



















































































































Отзывы:

Нет отзывов

Похожие инструкции для LBP3310

Sure shot 80 tele

Бренд: Canon Страницы: 24

iPF720 - imagePROGRAF Color Inkjet Printer

Бренд: Canon Страницы: 8

Бренд: Canon Страницы: 2

Бренд: Panasonic Страницы: 155

Бренд: Panasonic Страницы: 160

Бренд: Dascom Страницы: 138

Бренд: Dascom Страницы: 166

Бренд: Xerox Страницы: 2

Бренд: DNP Страницы: 66

Бренд: A&D Страницы: 66

Бренд: Lexmark Страницы: 289

Aficio SG 7100DN

Бренд: Ricoh Страницы: 359

Бренд: POS Tablet Страницы: 4

Бренд: Epson Страницы: 4

Бренд: Epson Страницы: 36

Бренд: Epson Страницы: 4

Бренд: Epson Страницы: 115

Бренд: Epson Страницы: 248

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды