Canon LBP 3370 Скачать руководство пользователя страница 289

Страница: 289 / 362

8-30

oub

leshooting

Message List

Remedy 2 Perform a soft reset in the RESET menu, increase the free space of RAM using

the following procedure, and then print again.

•

Perform a hard reset or cycle the power of the printer (Be aware that all the
data in the memory that the printer has received will be deleted).

<35 TABLE FULL>

<Auto Error Skip>

Cause

The number of the documents in a job has exceeded 16.

Remedy

The printer continues printing by pressing the

(Online) key. However, the

job with which an error has occurred is not printed.

<38 LOW IMGE QLTY>

<Auto Error Skip>

Cause

The printer cannot process the data because it is too complicated.

Remedy 1 The printer continues printing by pressing the

(Online) key. However, the

printer prints with the image quality level being lowered.

Remedy 2 Perform a soft reset in the RESET menu, set GRADATION LEVEL (See p. 6-24)

in the QUALITY MENU options in the SETUP menu to STANDARD, and then
print again.

<39 SPL MEM.FULL>

<Auto Error Skip>

Cause

Because spool memory has run out, the printer cannot print.

Remedy 1 The printer continues printing by pressing the

(Online) key. However, the

page with which an error has occurred is not printed.

Remedy 2 Perform a soft reset in the RESET menu, specify the paper size smaller, and

then print again.

Remedy 3 Perform a soft reset in the RESET menu, set GRADATION LEVEL (See p. 6-24)

in the QUALITY MENU options in the SETUP menu to STANDARD, and then
print again.

Remedy 4 If 2-SIDED PRINT. in the FEEDER MENU options in the SETUP menu is set to

ON, specify OFF, and then print again.

Remedy 5 Change the setting for HALFTONES (See p. 6-26) in the QUALITY MENU

options in the SETUP menu, and then print again.

Содержание LBP 3370











































































































































































































































































































































































Результаты поиска

Содержание LBP 3370

Отзывы:

Canon LBP 3370, Руководство пользователя, Страница: 289 / 362

Результаты поиска

Содержание LBP 3370

Отзывы: