Canon Laser Class 2060 Скачать руководство пользователя страница 96

Страница: 96 / 350

4-6

Paper Handling

Chapter 4

When you are printing, follow these guidelines:

❏

Always set the paper delivery selector before starting to print.

❏

Do not switch the paper delivery selector until the printout comes out
of the delivery slot completely. Otherwise, a paper jam may occur.

❏

Make sure there is enough room for the paper to exit from the face-up
delivery slot.

❏

Never pull the paper as it comes out of the unit.

❏

When using face-up delivery, let the paper slide onto the extension
tray.

❏

When using face-up delivery, remove each sheet as it is delivered
through the face-up delivery slot.

❏

When using the multi-purpose tray, be careful not to let any foreign
object, such as your necktie, necklace, hair, etc. enter into the feeder.

Содержание Laser Class 2060































































































































































































































































































































































Результаты поиска

Содержание Laser Class 2060

Отзывы:

Canon Laser Class 2060, Руководство пользователя, Страница: 96 / 350

Результаты поиска

Содержание Laser Class 2060

Отзывы: