100
Before Use
Basic Guide
Advanced Guide
Wi-Fi Functions
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
4
Establish a connection with an
access point.
●
Connect to the access point as described
in steps 5 – 7 in “Using WPS-Compatible
in “Connecting to Listed Access Points”
5
Enter your email address.
●
Once the camera is connected to CANON
iMAGE GATEWAY via the access point, a
screen is displayed for entering an email
address.
●
Enter your email address, press the
[ ][ ] buttons to choose [Next], and
then press the [ ] button.
6
Enter a four-digit number.
●
Enter a four-digit number of your choice,
press the [ ][ ] buttons to choose
[Next], and then press the [ ] button.
●
You will need this four-digit number later
when setting up linkage with CANON
iMAGE GATEWAY in step 8.
7
Check for the notification message.
●
Once information has been sent to
CANON iMAGE GATEWAY, you will
receive a notification message at the
email address entered in step 5.
●
Press the [ ] button on the next screen,
which indicates that notification has been
sent.
●
[
] now changes to [
].
Registering CANON iMAGE GATEWAY
Link the camera and CANON iMAGE GATEWAY by adding CANON
iMAGE GATEWAY as a destination Web service on the camera. Note
that you will need to enter an email address used on your computer or
smartphone to receive a notification message for completing linkage
settings.
1
Access the Wi-Fi menu.
●
Press the [ ] button.
●
If the [Device Nickname] screen is
displayed, press the [ ][ ] buttons to
choose [OK], and then press the [ ]
button.
2
Choose [
].
●
Press the [ ][ ][ ][ ] buttons to choose
[
], and then press the [ ] button.
3
Accept the agreement to enter an
email address.
●
Read the agreement displayed, press the
[ ][ ] buttons to choose [I Agree], and
then press the [ ] button.
