Canon IX 4000 Скачать руководство пользователя страница 6

INSTALLATION MANUAL ON CISS FOR PRINTER CANON IX 4000/IP 4200

 

3

Please do not block up ink tanks for curiosity or for fear of less ink  

4. Use CISS at clean environment and within the temperature range 15-35 

degrees. 

 

VIII. Product Warranty 

INKSYSTEM  warrants  its  products  to  be  free  from  defects  in  material  or 

workmanship.  Rarely  the  equipment  partly  or  completely  fails  within  the  warranty 
period.  In  these  cases  we  do  everything  possible  to  ensure  that  our  customers  are 
satisfied with the purchase. 

The INKSYSTEM CISS installation is free in any of the representative offices.   
The  warranty  repairs  are  done  quickly,  with  good  quality  and  for  free.  The 

warranty  duration  is  12  months  from  the  date  of  retail  sale.  Every  product  has  a 
Warranty Certificate. The transportation of the failed product is provided by its owner. 

 

Please note that the ink and the photo paper are expendable materials and there 

can be no returning of unsealed ink tanks and photo paper packages. When defects are 
found by the service managers, a replacement for a new product is performed. 

 

Please adhere to the following points to receive a warranty service as soon 

as possible:  

 When  accepting  the  product  check  if  the  warranty  certificate  is  filled  in 

correctly.  

 

Keep the original receipt that contains the date of purchase information.  

 

Adhere to operating conditions that are provided in the User’s Manual, or on the 
web-page of the specific product.   

 

Try to avoid mechanical damages when operating the product: chippings, dents, 
fractures, scratches, etc.   

We cannot provide a warranty repair under several conditions:  

 

 

If the warranty certificate is wrongly filled in.   

 

If the device has mechanical damages: chippings, dents, fractures, scratches, etc. 

 

If the defect appeared under the circumstances of insuperable forces, accidents, 
intended or careless actions of the user or a third party.   

 

If the ink used was not manufactured by “INKSYSTEM” (South Korea) 

 

If the printing limit was exceeded – more than 100 000 prints.  

The  “INKSYSTEM”  Company  excludes  for  itself  any  liability  for  incidental, 

consequential,  indirect,  special,  or  punitive  damages  of  any  kind  to  people,  pets  or 
property  if  the  stated  damages  have  been  affected  because  of  rules  and  operational 
conditions / product installation disregard. The Company also excludes any liability for 
intentional or careless actions of the user or third parties, for loss of revenue or profits, 
loss of business, loss of information or date, or other financial loss arising out of or in 
connection  with  the  sale,  installation,  maintenance,  use,  performance,  failure,  or 
interruption of the possibility of such damages. 

  

Содержание IX 4000









Отзывы: