Canon iR6570 series, Портативное руководство

Страница: 195 / 320

Chapter 5
5-45
5.4 FUNCTION (Operation/Inspection Mode)
5.4.1 COPIER
5.4.1.1 COPIER List
0009-5980
iR5570 / iR6570
<INSTALL>
T-5-32
COPIER > FUNCTION > INSTALL
Sub-item Description Level
TONER-S Use it to stir the toner inside the developing assembly at time of
installation.
Procedure
1. Select the item to highlight.
2. See that the message "Check the developer" is indicated.
At this time, check to see that the developing assembly is correctly
mounted.
3. Press the OK key to start the operation. The operation will
automatically stop after a specific period of time.
during operation, time remaining (sec): at the end, if successful, '0';
if error, '0xFFFF'.
1
CARD Use it to set up the card reader.
Procedure
Enter the number of a specific card (0 to 2001), and press the OK
key. (As many as 100 cards may be used, starting from the number
you have entered.)
At this time, initialization will take place for card control
information (group ID and ID No.).
1
E-RDS Use it to specify the use of E-RDS.
0: off (do not use; default)
1: use RDS (transmit all counter information)
1
RGW-PORT Use it to set the Sales Company server port number used for
embedded-RDS.
settings range: 1 to 6535
1