manualshive.com logo in svg

Canon iR5020i, Руководство по копированию

Поделиться
Скачать
Canon iR5020i Скачать руководство пользователя страница 30

1

Selecting an Output Device (Select Output Device)

1-20

Basic Copying

1

IMPORTANT

•

You can only use remote or cascade copying with the iR6020i/iR5020i.

•

When the machine is operating in the remote or cascade copy mode, you cannot use the Rotate 
Collating, Rotate Grouping, Saddle Stitch, Shift (No. Key Entry), Booklet, Transparency Interleaving, 
Mirror Image, Form Composition, Scan Image Check, Page Numbering, Interrupt Copy, and Sample 
Set modes.

•

If you use Cover/Sheet Insertion with the remote or cascade copy mode, Auto Orientation is not 
performed.

•

If you use the Image Separation with the remote or cascade copy mode, the layout of the final page of 
the original cannot be set.

•

If you power the remote copy printer back on, or re attach the Finisher, you need to refresh the settings 
of the remote copy printer from the Additional Functions screen. (See “Confirming a Remote Device”, 
on p. 3-16.)

•

If you connect the machine directly to other remote copy printers by crossover patch cord, you need to 
configure the Ethernet driver as shown below. (See “Chapter 2 Settings Common to the Network 
Protocols” in the Network Guide.)
- Auto Detect: Off
- Communication Mode: Full Duplex
- Ethernet Type: 100 Base-TX

NOTE

•

In order for a device to be selected as a remote output device used for remote copying, it must be stored 
in the Store Remote Device function in the Copy Settings screen. (See “Specifying the Remote Copy 
Printer Settings”, on p. 3-14.)

•

For cascade copying, the Paper Select screen of this machine is displayed. Select the paper drawer on 
the machine that is loaded with the same paper size as the remote copy printers. 

•

To copy the original on this machine and another remote copy printer on the network at the same time 
(cascade copying), the number of copies set for this machine and the number of copies set for the 
remote copy printer are split in half and printed. If an odd number of copies is set, the machine you are 
copying from will print one additional copy.

•

Remote and cascade copying is available on the iR6020i/iR5020i and iR6000i/iR5000i.

•

If you select a remote copy printer before performing cascade copying, you cannot select copy settings 
that are not supported by the remote copy printer. Also, if the finishers attached to this machine and the 
remote copy printer are different, the finisher settings can only be set to Collate and Group modes.

•

When a remote copy or a cascade copy job is in progress, it is not possible to schedule another remote 
copy or cascade copy job.

•

For the selected remote copy printer, set the same Department ID and password as this machine. 
(See “Chapter 4 System Manager Settings” in the Reference Guide.)

•

When one remote copy or one cascade copy job is in progress, if an error occurs in the remote copy 
printer, an error message is displayed on the Job/Print monitor area of the touch panel display of this 
machine and the remote copy printer.

•

If you experience any problems when using the remote or cascade copy modes on the iR6020i/iR5020i 
or iR6000i/iR5000i, contact your service representative.

Содержание iR5020i

























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды