
3-7
Setting the Job Duration Display
Setting/Storing
Spec
if
ications
of
the
Co
py
Function
3
Setting the Job Duration Display
When the Job Duration Display is set to ‘On,’ the time remaining until completion of the copy job
(Job Duration Time) is indicated in minutes on the touch panel display. (The job duration time is
not displayed for some copy modes.)
NOTE
• The job duration time is shown as the <Print Time> on the screen displayed during printing.
• The job duration time is not displayed for the Remote or Cascade Copy, Transparency Interleaving, Cover/Sheet
Insertion, Different Size Originals, Rotate Collating, and Rotate Grouping modes, or when the copy waiting time is
less than one minute.
• The default setting is ‘Off.’
1
Call up the desired screen as follows:
➔
[Copy Settings]
➔
[Job Duration Display]
2
Select [On] or [Off], and press [OK].
The specified mode is set.
3
Press [Done] repeatedly until the Basic Features screen appears.
Содержание IR2220I
Страница 1: ...Canon iR3320i iR2220i iR3320N Copying Guide ...
Страница 110: ...1 100 Changing or Cancelling a Selected Copy Mode Setting Confirmation Cancel Basic Copying 1 ...
Страница 216: ...3 22 Restoring Settings to Their Default Copy Settings Setting Storing Specifications of the Copy Function 3 ...
Страница 217: ...CHAPTER 4 1 4 Appendix Available Combinations of Functions Chart 4 2 Index 4 6 ...