SERVICE BULLETIN
COPIER
Issued by Canon Europa N.V.
MODEL:
iR1230,
iR1270F
No.:
iR1200S-004 Rev. 1
(FF-T01-L6-000056-01)
Date:
22.11.02
LOCATION:
ADF ASSEMBLY (2/2)
SUBJECT:
THE SHAPE OF MEMBER PART CHANGED
Reason :
For manufacturing reasons
Outline :
XD2-1100-242 (RING, E; See 507 in the attachment) prevented coming off of
FC5-0054-000 (SHAFT, REGIST PRESSURE ARM; See 37 in the attachment).
However, the shape of the base part attached to FC5-0054-000 is changed this time,
to prevent FC5-0054-000's coming off instead.
Therefore, XD2-1100-242 is not used with this change.
In addition, the groove of FC5-0054-000 to attach XD2-1100-242 is not used.
Service Parts
FC5-0054-000 with groove is stored.
For the products manufactured before this change, XD2-1100-242 is stored.
NOTE)
In the case that FC5-0054-000 cannot be attached to the base part, remove
XD2-1100-242.
Figure 161 of the Parts Catalog (partial)
