– 7 –
3
Point to Note Before Starting
the Work
Go through the following before starting to install
the machine:
If the machine is moved from a cold to a
warm place for installation, condensation
can develop in its pickup/feeding
assembly, causing image faults. To avoid
the condensation, leave the machine
unpacked for 1 hr or more so that it will
be fully used to the room temperature.
(The term
condensation
refers to the
development of drops of water on a
mental surface when it is brought from a
cold to warm place. This occurs as a
result of rapid cooling of vapor in the
air.)
4
Unpacking
1) Holding the grips on the left and right of the
machine, lift it out of the box.
F4-1
2) Remove the packing material: plastic sheets,
securing members, and tape.
3) Remove the shipping screw.
F4-2
4) While pulling on the reader unit slide lever,
slide out the reader unit to the left.
F4-3
F-IM-6267-000̲e.p65
04/02/25, 11:19
Page 7
Adobe PageMaker 6.5J/Win
