manualshive.com logo in svg

Canon iR105 Series, Руководство по обслуживанию, Страница: 410 / 1029

Поделиться
Скачать
Canon iR105 Series Скачать руководство пользователя страница 410

CHAPTER 6 TROUBLESHOOTING

6-78

COPYRIGHT© 2001 CANON INC. 

2000 2000 2000 2000

 CANON iR105 REV.0 JULY 2001

3.3.10 The output has white spots (vertical)
3.3.11 The output has white lines (vertical)

Copy paper

1) Try paper fresh out of package. Is the problem corrected?

YES: The copy paper is most. Advise the user on the place and method

of storage.

Dust-proofing glass

2) Clean the dust-proofing glass. Is the problem corrected?

YES: End.

Scanner (dirt)

3) Does the problem occur only in copy images?

YES: The cause is between scanner and CCD. Perform the following:

[1] Check the standard white plate for dirt.
[2] Execute the following in service mode:

COPIER>FUNCTION>CCD>CCD-ADJ.

Photosensitive drum

4) Is there a scratch on the surface of the photosensitive drum in pe-

ripheral direction corresponding to the problem in the images?

YES: Find out the cause of the problem, and replace the photosensitive

drum.

Developing assembly

5) Is the surface of the developing cylinder coated with an even layer

of toner?

NO:

[1] Check if paper lint is trapped on the edge of the blade of the

developing assembly.

[2] Check to make sure that the connector at the front of the de-

veloping assembly is securely connected with the machine.

Fixing assembly

6) Using the door switch actuator, generate a test print (PG-TYPE6,

solid black) with the front cover open. Turn off the switch immedi-
ately before the copy paper enters the fixing assembly, and check
the image. Is the image normal?

YES: The cause is after the fixing system. Perform the following:

[1] Check the fixing upper roller for offset.

Содержание iR105 Series






































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов