manualshive.com logo in svg

Canon iPF830 Series, Основное руководство

Поделиться
Скачать
Canon iPF830 Series Скачать руководство пользователя страница 125

Cause

Corrective Action

Press 

▲

 or 

▼

 to select 

Change Pa-

per

, and then press the 

OK

 button to

stop printing.
 (See "Removing the Roll from the
Printer.")

➔

P.18

 (See "Loading Rolls in the Print-
er.")

➔

P.15

Press 

▲

 or 

▼

 and select 

Stop Print-

ing

 or press the 

Stop

 button to stop

printing.

This paper cannot be used as size is not supported.

This paper cannot be used as size is not supported.

Cause

Corrective Action

Paper that is too large for the printer has been
loaded.

Lift the Release Lever and load paper of the correct size.
 (See "Paper Sizes.")

➔

User's Guide

Paper that is too small for the printer has been
loaded.

Lift the Release Lever and load paper of the correct size.
 (See "Paper Sizes.")

➔

User's Guide

Paper has been loaded that is too small to
print the test pattern for printhead adjustment
or nozzle checking.

Lift the Release Lever and load unused paper A4/Letter (vertical) or larger. More
than one sheet may be required depending on the adjustment.

Roll printing is selected.

Roll printing is selected.

Cause

Corrective Action

You have attempted to print on a roll,
but no roll is loaded.

Press 

▲

 or 

▼

 to select "

Load Roll Paper

", and then press the 

OK

 button. Load the roll,

and then print.
 (See "Attaching the Roll Holder to Rolls.")

➔

P.12

 (See "Loading Rolls in the Printer.")

➔

P.15

Press 

▲

 or 

▼

 and select 

Stop Printing

 or press the 

Stop

 button to stop printing.

Roll printing is selected, but sheets are loaded.

Roll printing is selected, but sheets are loaded.

Cause

Corrective Action

A print job for rolls was received when a
sheet is loaded.

Follow these steps to load and print on a roll.

1.

Press 

▲

 or 

▼

 to select 

Eject Cut Sheet

, press the 

OK

 button, and remove the sheet.

 (See "Removing Sheets.")

➔

P.23

2.

Load a new roll.
 (See "Loading Rolls in the Printer.")

➔

P.15

The printer now starts printing the print job.

Press 

▲

 or 

▼

 to select 

Stop Printing

, and then press the 

OK

 button.

iPF830 Series

                                                                                                                                   

This paper cannot be used as size is not supported.

Basic Guide

                                                                                                                                                                                                                       

   

Error Message

Messages regarding paper

125

 

Содержание iPF830 Series



















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды