Canon iPF710 - imagePROGRAF Color Inkjet Printer, Руководство по обслуживанию

Страница: 44 / 238

Chapter 1
1-33
[GL2 Settings]
T-1-13
[NearEnd
RollMrgn] Specify a margin at the leading edge of roll paper to ensure better
printing quality at the leading edge.
Note that if you choose 3 mm , it may lower the printing quality at
the leading edge and affect feeding accuracy. The printed surface
may be scratched, and ink may adhere to the the leading edge.
[Cut Speed] Choose the cutting speed. For media such as film that are more
likely to generate debris when cut, choose Fast to reduce the
amount of debris.
[Trim Edge First] The leading edge of roll media is cut when it is loaded.
[Cutting Mode] Specify if the Cutter Unit is used for cutting.
Choose Automatic to have roll paper cut automatically after
printing. If you choose Eject , the paper will not be cut after
printing. Instead, a line will be printed at the cut position.
[Bordless Margin] Adjust the margin during borderless printing.
[CutDustReduct.] Choose On to reduce the amount of debris generated when cutting
film and similar media by printing a line at the cut position. This
option reduces the amount of debris given off after cutting.
[Manual Feed] Choose how the paper is supplied, Top for printing from the Tray
or Front for printing from the Front Paper Feed Slot .
[NearEnd Sht Mrgn] Specify a margin at the leading edge of sheets to ensure better
printing quality at the leading edge.
Note that if you choose 3 mm , it may lower the printing quality at
the leading edge and affect feeding accuracy. The printed surface
may be scratched, and ink may adhere to the the leading edge.
If you have selected 20 mm , the test print sheet may not be printed
completely.
[Return Defaults] Choose Yes to restore Med.Detail Set. to the factory default
values.
Setting Item Description, Instructions
[GL2 Replot] Reprint the last printed page stored in the printer.
[GL2 BufferClear] Delete the last printed page stored in the printer.
[Color Mode] Choose the color mode.
[Print Quality] Choose the print quality.
[Input Resolution] Select [600dpi] or [300dpi] as the print resolution.
[Media Source] Select the method of feeding paper when using the HP-GL/2 for printing.
[Conserve Paper] Print using paper sparingly.
[End Point Shape] Select [Software] or [Round] as the shape of the line end.
[Smoothing] Select whether to print an arc with a smooth curve or polygon.
[Line Width]
Select the printing line width for the data for which a line width is not
specified.
Setting Item
Description, Instructions