Canon iPF700, Руководство по обслуживанию

Страница: 49 / 202

Chapter 2
2-3
2.2.2 Operation Sequence at Power-off
0013-5400
Turning off the power switch cuts off the drive voltage supply, launching a firmware power-off sequence as
shown below.
If the power cord is disconnected from the wall outlet or the top cover or any other cover is opened, the printer
cancels the ongoing operation and shuts down immediately. Since printhead capping may or may not have
been carried out properly, reconnect the power cord to the wall out and turn on the power switch. Making
sure that the printer has entered online mode, turn off the power switch.
F-2-3
2.2.3 Print Control
0012-6247
a. Print modes
Print methods, such as carriage and paper feed operation, are varied according to the media type, print quality,
kind of print data and so forth to achieve high-quality high-speed print free from blurring and uneven density.
Because each color prints in up to 16 passes according the print quality requirement for a print mode, uneven
density problems caused by variations in the rate of discharge among different nozzles are eliminated. Deferred
print timings do not allow a new ink to overprint the preceding ink until the preceding ink has virtually fixed,
thereby reducing the chances of blurred printing.
Different operations take place even in the same print mode according to the paper setting of the print driver.
(1) Draft mode
Imaging data are thinned out to print in one or two passes per band (equivalent of the length of a nozzle).
Select Draft as a print quality setting of the print driver to enable draft mode.
(2) Standard mode
Power button OFF
If media remains,it is ejected even
when printing is in progress.
Media ejection
Power-off automatic recovery
Capping
Sensor system power OFF
Backup of various data
Power-off
Hold down for at least once second
Writing to EEPROM