Canon iP4500 - PIXMA Color Inkjet Printer, Упрощенное руководство по обслуживанию

Страница: 23 / 54

22
<Left margin correction>
Adjust the left margin for duplex printing or printing from the cassette.
1) Duplex printing from the rear tray and cassette
In the left margin correction mode, press the Resume/Cancel button 1 time, then press the Power
button 1 time. Duplex printing is performed from the rear tray and cassette.
Number of times the Resume/Cancel
button is pressed (L)
Operation
0 times No operation
1 time Duplex printing from the rear tray and cassette
2 times
Return to the service mode menu selection (no
writing to the EEPROM)
From each paper source (rear tray and cassette), 2 sheets of paper are ejected. The first sheet is
blank, and the left margin correction pattern is printed on the second sheet.
After this, set the correction value to the EEPROM in the steps below.
<Printing
sequence>
For detail, see the flowcharts below.
i) A sheet of paper feeds from the rear tray, and ejected blank (single-sided printing).
ii) A sheet of paper feeds from the rear tray. Nothing is printed on the front side, and the
pattern is printed on the back side (duplex printing).
iii) A sheet of paper feeds from the cassette, and ejected blank (single-sided printing).
iv) A sheet of paper feeds from the cassette. The pattern is printed on both sides of paper
(duplex printing).
A total of 4 sheets are ejected.
2) Selection of the parameter mode for left margin correction
Press the Resume/Cancel button the specified number of time(s) according to the parameter mode
listed in the table below, then press the Power button.
Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light alternately,
Alarm in orange and Power in green.
Number of times the Resume/Cancel
button is pressed (M)
Parameter mode
0 times Duplex printing from the rear tray and cassette
1 time Back side of paper fed from the rear tray
2 times Front side of paper fed from the cassette
3 times Back side of paper fed from the cassette
4 times or more
Return to the service mode menu selection
(after writing to the EEPROM)
3) Setting of the left margin correction value ("+" means to increase the left margin)
Press the Resume/Cancel button the specified number of time(s) according to the correction value
listed in the table below, then press the Power button.
Number of times the Resume/Cancel
button is pressed (N)
Left margin correction value
0 times
Return to the parameter mode selection for left
margin correction
1 time +1 pitch