Canon iP4000 - PIXMA Photo Printer, Руководство по обслуживанию

Страница: 19 / 34

(4) Waste ink counter setting
When the logic board ass'y is replaced, reset the waste ink counter. In addition, according to the waste ink amount, replace the waste ink absorber (the bottom case
unit or the ink absorbers). The standard amount for waste ink absorber replacement is given in the table below.
*1: Check the waste ink amount by service test print or EEPROM information print.
[See 3.3. Adjustment / Settings, (6) Service mode, for details.]
(5) User mode
<Standalone printer operation>
1) Turn on the printer.
2) Press and hold the Resume/Cancel button until the LED blinks the specified number of times listed in the table below, and release it. The operation starts.
Waste ink amount *1 Bottom case unit or ink absorber replacement
Less than 7% Not required.
7% or more Required.
Function Procedures Remarks
Print head manual cleaning - Cleaning both black and color:
See "Standalone printer operation" below.
- Cleaning black or color separately, or both black and color:
Perform from the printer driver's Maintenance tab.
Print head deep cleaning - Cleaning black or color separately, or both black and color:
Perform from the printer driver's Maintenance tab.
Paper feed roller cleaning See "Standalone printer operation" below.
Nozzle check pattern printing See "Standalone printer operation" below. Also available from the printer driver's
Maintenance tab.
Print head alignment See "Standalone printer operation" below. In Custom Settings of the printer driver's
Maintenance tab, manual print head alignment (by
selecting the optimum values) as with the
conventional models can be performed.
Bottom plate cleaning Perform from the printer driver's Maintenance tab. Cleaning of the platen ribs when the back
side of paper gets smeared.
Print head replacement The print head is replaceable at the same position as for
ink tank replacement. (Open the access cover. When the
carriage stops at the center, the print head can be
replaced.)
LED blinking Operation Remarks
1 time Print head manual cleaning
2 times Nozzle check pattern printing Set a sheet of plain paper (A4 or letter) in the ASF or the cassette (according
to the Paper Feed switch setting).
3 times Paper feed roller cleaning
4 times Automatic print head alignment Set a sheet of plain paper (A4 or letter) in the ASF.
5 times Bottom plate cleaning Fold a sheet of plain paper (A4 or letter) in half crosswise, then unfold and set
it in the ASF with the folded ridge facing down.
6 times or more Unspecified
1 - 14