Canon Inner 2 Way Tray-E1, Руководство по обслуживанию

Страница: 25 / 42

Chapter 3
3-1
3.1 Removing from the Host Machine
3.1.1 Inner 2 Way Tray
3.1.1.1 Removing the Drum Unit
0011-3250
1) Open the front cover [1].
2) Turn the developing assembly locking lever [2] clockwise to open the left
door [3].
3) Draw out the drum unit [4].
F-3-1
- When attaching or detaching the drum unit, open the left door fully to pre-
vent the damage to the drum unit.
- To prevent exposure of the drum, cover the drum unit with a few sheets of
paper and place it in a safe place.
3.1.1.2 Removing the rear cover
0011-3251
1) Remove the four RS tightening screws (M3 x 8) [1], and then detach the
rear cover [2].
F-3-2
3.1.1.3 Removing the lowerl-right cover
0011-3252
1) Remove the five RS tightening screws (M3 x 8) [1]. Release the two hooks
[2], and then detach the lower-right cover [3].
F-3-3
3.1.1.4 Removing the upper-right cover
0011-3253
1) Remove the RS tightening screw (M3 x 8) [1], and then detach the upper-
right cover [2].
F-3-4
3.1.1.5 Removing the delivery tray
0011-3254
1) Remove the two RS tightening screws (M3 x 8) [1], and then remove the
delivery tray [2].
F-3-5
When removing or reinstalling the delivery tray, take care not to damage
the paper holder [3].
3.1.1.6 Removing the front-left cover
0011-3255
1) Draw out the cassette slightly forward
2) Remove the two RS tigh screws (M3x8) [1],and then detach the front-left
cover [2].
F-3-6
Take note of the hook [3] inside the front-left cover when removing it.
3.1.1.7 Removing the delivery assembly top cover
0011-3256
1) Remove the RS tightening screw (M3 x 8) [1], and then detach the deliv-
ery assembly top cover [2].
3.1.1.8 Removing the delivery assembly cover
0011-3307
1) Remove the P tightening screws (M4 x 10) [1], and then detach the deliv-
ery assembly cover [2].
[2]
[1]
[3]
[4]
[1]
[2]
[1]
[1]
[3]
[2]
[2]
[1]
[2]
[3] [2]
[1]
[2]
[1]
[3]